How To Fit Vertical Blinds
ChennaiBlinds - Learning how to fit vertical blinds isn't as difficult as you may think.
If you have bought made to measure vertical blinds then you'll see
watching the video below that you can fit a blind in just a few minutes.
Things you will need:
- Tape measure or ruler
- Pencil
- Drill
- Screwdriver
- Plugs and Screws
- Scissors
First of all you need to mark where your brackets will go. If you have a
small headrail like the one in the video then you should position them
around 5 or 6 inches in from the end. On wide vertical blinds you will
have received more brackets. Simply space them out equally along the
width of the blind. If you have ordered face fix brackets which would be
needed for fitting blinds to a conservatory or for places without a
window recess such as in a dormer then you can now simply screw these to
either the head of the window frame or to the wall itself. In the video
however we show top fix brackets that are the most common method of
fitting and would have come with you blind as standard.
Face Fix or Top Fix Vertical Blinds
As the video shows, you will need to measure 3 1/4 inches from the face
of the window frame (around 85mm) drill a hole and use a plug. Normally
screws and plugs aren't supplied as there are several different types of
material that may be at the head of your frame. The most common will be
plaster however if you have a steel lintel then you'd need to use a
different type of screw and no plug. Your local DIY store would be able
to advise.
Once the brackets are in place the headrail simply clicks into place. Be
sure to offer the front of the rail into the bracket first. Please
watch the video below for more details and to see how easy it is to fit
vertical blinds.
Click here How To Fit Vertical Blinds
0 comments:
Post a Comment
Thank you...